NEWS

Wenzhou Tianrui Chemical Fibre Co.,Ltd

02

2024

The concept and characteristics of non-woven fabrics

Non woven fabric (also known as non-woven fabric) is a new generation of environmentally friendly materials, with characteristics such as water repellency, breathability, flexibility, non combustible, non-toxic and non irritating, and rich colors. If the material is placed outdoors and naturally decomposed, its maximum lifespan is only 90 days. If it is placed indoors and decomposed within 5 years, it is non-toxic, odorless, and has no residual substances when burned, thus not polluting the environment. Therefore, environmental protection comes from this. Suitable for washing and other items. It is a new type of fiber product with soft, breathable, and flat structure, which is directly formed through various fiber mesh forming methods and consolidation techniques using high polymer slicing, short fibers, or long filaments. 1. Lightweight: Made mainly from polypropylene resin, with a specific gravity of only 0.9, which is only three-fifths of cotton. It has fluffiness and a good hand feel. 2. Soft: Made of fine fibers (2-3D), it is formed by light spot hot melt bonding. The finished product has moderate softness and a comfortable feeling. 3. Water absorption and breathability: Polypropylene chips do not absorb water, have zero moisture content, and the finished product has good water absorption performance. It is composed of 100% fibers with porosity and good breathability, making it easy to keep the fabric surface dry and easy to wash. 4. Non toxic and non irritating: The product is produced using FDA compliant food grade raw materials, free of other chemical components, stable in performance, non-toxic, odorless, and non irritating to the skin. 5. Antibacterial and anti chemical agents: Polypropylene is a chemically inert substance that does not cause insect infestation and can isolate bacteria and insects present in the liquid; Antibacterial, alkaline corrosion, and the strength of the finished product is not affected by erosion. 6. Antibacterial properties. The product has water repellency, is not moldy, and can isolate the erosion of bacteria and insects in the liquid, without mold and decay. 7. Good physical properties. Made by directly laying polypropylene spinning into a mesh and hot bonding, the product has better strength than general short fiber products, with no directional strength and similar longitudinal and transverse strength. In terms of environmental protection, the majority of non-woven fabrics currently used are made of polypropylene, while the raw material for plastic bags is polyethylene. Although the two substances have similar names, their chemical structures are vastly different. The chemical molecular structure of polyethylene has strong stability and is extremely difficult to degrade, so plastic bags take 300 years to decompose completely; However, the chemical structure of polypropylene is not strong, and the molecular chains can easily break, which can effectively degrade and enter the next environmental cycle in a non-toxic form. A non-woven shopping bag can be completely decomposed within 90 days. Moreover, non-woven shopping bags can be reused more than 10 times, and the pollution level to the environment after disposal is only 10% of that of plastic bags.

02

2024

Introduction to flame-retardant synthetic fibers

In recent years, China's research, development, and use of flame retardant fibers have gradually increased, and significant progress has been made. With the acceleration of urban modernization construction, the development of tourism and transportation industries, and the increasing demand for export, there is a huge potential market for flame retardant fiber series products. According to the survey, the consumption of flame retardant products is mainly distributed in the steel casting industry, fire service industry, and chemical manufacturing industry; Government units mainly include hospitals, military, and forest firefighting service teams. In addition to clothing, flame-retardant textiles for cars, trains, and airplanes also have endless potential. In addition, adding seat covers for movies, theaters, and auditoriums would be even more impressive. Polyester (polyethylene terephthalate, PET) has many advantages and is widely used in textiles. It has become the most widely used and consumed variety, thus its flame retardancy has attracted widespread attention worldwide. In addition, according to reports, the production of flame retardant polyester fibers in the world has accounted for 10-15% of the total production of polyester fibers. The research on phosphorus based flame retardant copolyesters in foreign countries is more extensive and in-depth than in China, and there are many related literature reports. The industrialized varieties of flame retardant polyester fibers abroad mainly use copolymerization flame retardant modification methods. The phosphorus based flame retardant system in polyester not only reduces the heat release rate of the material through solid-phase carbonization and mass retention mechanisms, but also partial gas-phase flame retardant mechanisms. It has good flame retardancy and reduces the release of corrosive or toxic gases and smoke, making it environmentally friendly. Flame retardant materials are currently gaining popularity, especially in North America, Central America, and Europe where flame retardant technology is developing well. In recent times, research and innovation in flame retardants in Asia have also been advancing day by day. California, USA is a popular destination for the development of flame retardant material technology. In 2005, some laws and regulations (such as the very strict mattress regulations) and federal standard 16CFR1633 were completed and passed. In addition, there are regulations such as the North American Free Trade Agreement (NAFTA), the California Consumer Product Safety Commission (CPSC), and the European Union on Hazardous Goods Restrictions (POHS). All of these indicate that new regulations at the state, federal, and EU levels, as well as the rise of modern technology, have unprecedentedly posed new requirements and challenges to this industry. At the same time, these regulations have put forward high requirements and standards for people's safety and health. Thus promoting the research and development of flame retardant properties and flame retardants for textiles. Companies in the United States, Europe, Japan, and China have conducted extensive experiments and research. Significant progress and achievements have been made, resulting in a significant improvement in the flame retardant performance of fiber products and meeting the requirements of various regulations.

02

2024

Main uses of polyester filament spunbond hot-rolled non-woven fabric

1. Drainage board: It can be used to make filter membranes for drainage boards in soft foundation treatment, with high permeability coefficient, high tensile and compressive strength, and strong soil separation performance. 2. Wrapping cloth: It can be used as a material for housing wrapping cloth and padding, with advantages such as breathability, moisture resistance, long service life, and energy conservation. It can play a role in windproof, anti prying, anti mold, and insulation, creating a drier, healthier, and more environmentally friendly living space for you. 3. Filter material: It can be used as a gas and liquid filter material. Due to the fiber fineness reaching 0.75d, a more uniform fiber distribution can be obtained, resulting in better filtration effect. 4. Cable wrapping: can be used as a cable wrapping material, with advantages such as high temperature resistance, long service life, and aging resistance, and has become a conventional wrapping material in the world cable industry. 5. Waterproof membrane: It can be used as a base material for making advanced waterproof membranes such as SBS and apps. It has high tensile strength, good elongation performance, excellent thermal stability, strong puncture resistance, corrosion resistance, aging resistance, and other characteristics. 6. Agriculture and Horticulture: It can be processed into vegetables, fruit and melon harvest fabrics, seedling cultivation fabrics, soil insulation fabrics, greenhouse curtains, fruit bagging, etc. It has the characteristics of good breathability, good moisture permeability, and moderate light transmittance, which can promote crop growth, mature early, and effectively prevent insect infestation. In addition, the finished product is resistant to aging and can be reused, reducing costs. 7. Packaging materials: With the characteristic of strong longitudinal and transverse strength, they can be used for composite cement bags, packaging materials, various packaging substrates, etc. 8. Automotive interior: Green, environmentally friendly, and pollution-free, widely used in the production of automotive plush carpets and other interiors, making automotive interior decoration more beautiful and comfortable. 9. Medical and health products: disposable masks, hats, surgical gowns, shoe covers, protective clothing, pillowcases, bed sheets, duvet covers, etc.

02

2024

PET polyester filament spunbond hot-rolled non-woven fabric

Product attributes: Composition and content: 100% polyester Width: 1.6-1.7 meters Weight: 15g-130g Main uses: home textiles, printing, packaging materials, waterproof/filtering materials Product Description: Our company produces polyester non-woven fabric using polyester chips as raw materials, which are hot-rolled from spunbond filament. Many manufacturers have replaced polypropylene non-woven fabric with the excellent performance of polyester (pet) spunbond non-woven fabric. 1、 Better stability than polypropylene non-woven fabric Mainly manifested in performance such as strength and wear resistance. Due to the use of special raw materials in polyester non-woven fabric, it has been produced through advanced imported equipment and complex and scientific processing techniques, far exceeding the technical content and requirements of polypropylene non-woven fabric. 2、 Better heat resistance than polypropylene non-woven fabric Polypropylene non-woven fabric has obvious thermal shrinkage. According to the adjustment, there is a significant shrinkage when the temperature reaches 140 degrees. When the temperature of polyester non-woven fabric is 230 degrees, it has obvious characteristics compared to polypropylene non-woven fabric. 3、 Anti aging cycle is higher than polypropylene non-woven fabric Polyester non-woven fabric is made of polyester as the raw material, which is insect resistant, wear-resistant, and UV resistant. The above characteristics are higher than those of polypropylene non-woven fabric. 4、 Has good breathability Compared with polypropylene and other non-woven fabrics, polyester non-woven fabrics have excellent properties such as non water absorption, non water resistance, and strong breathability. PET polyester filament spunbond non-woven fabric: Our company's production equipment comes from Carson Company in Japan. At present, the company mainly produces small square dots with a weight range of 15g to 130g. It has the characteristics of high strength, low shrinkage, heat resistance, good stability, breathability, waterproof, mothproof, anti-aging and UV resistance.

< 1 >